Home | Television & Video |

ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for most 37-70 inch LED, LCD, OLED and Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16" Extension - EGLF1-BK

 
ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for most 37-70 inch LED, LCD, OLED and Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16" Extension - EGLF1-BK

ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for most 37-70 inch LED, LCD, OLED and Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16" Extension - EGLF1-BK
From ECHOGEAR

Price: $79.99 Details

Availability: Usually ships in 24 hours
Fulfilled by Amazon and Sold by ECHOGEAR

16 new or used available from $44.00

Average customer review:
( stars, based on 4195 reviews)

Product Description

Featuring up to 150° of smooth swiveling capability, this large full-motion TV mount is a real mover... not a shaker. Safety tested and UL Certified to hold up to 132 lbs, you can rest assured your 37" - 70" LED, LCD or Plasma TV will be safe on the strong arm of this Echogear tv mount.

What the H is "UL Certified"? It means we've tested this TV mount to verify that it will hold 4 times the weight rating and some safety science guys (that's a real thing) certified it. We'll do the math for you... 4 X 132 = 528 lbs!

Tech Specs:

VESA Compatibility: 200x100 up to 600x400 (universal increments)
TV Extension from Wall: 16"
Profile from Wall (Recessed) 2.6"
Swivel: Up to 150 degrees side-to-side (37" TV)
Tension Adjustable? (for smoother/stiffer articulation): Yes, using 7/32" Hex Key on Joint Bolts
Tilt: 5° up and 15° down
Post-install TV leveling adjustment: 3.5° left or right
Wall Plate Dimensions: 17.1" (W) x 10.2" (H)
Max Mounting Hole Dimensions: 16" (W) x 8.9" (H)
Wall Plate Openings for In-Wall Cable Management: 5.6" (W) x 7.6" (H) - Two Openings on each side
Construction: 100% High Grade Steel with Plastic End Caps for TV interface
Favorite Color: ECHOGEAR Orange

HDMI: v1.4 High Speed cable with bandwidth to support 1080p, 3D, and 4K/UHD 2160P picture @ 60 fps
Length: 6 ft.

Install Hardware Included:
5/16" x 2.75" Lag Bolts (4)
Lag Bolt Washers (4)
M4 x 12mm Screws (4)
M4 x 35mm Screws (4)
M6 x 12mm Screws (4)
M6 x 35mm Screws (4)
M8 x 16mm Screws (4)
M8 x 20mm Screws (4)
M8 x 35mm Screws (4)
M4/M5 Washers (4)
M6/M8 Washers (4)
22mm (7/8") TV Spacers (4)


Product Details

  • Size: 37-70 inch
  • Brand: ECHOGEAR
  • Model: EGLF1-BK

Features

  • Our heavy-gauge universal TV mount holds 37"-70" TVs weighing up to 132lbs. Don't worry, we'll do the heavy lifting: ECHOGEAR TV mounts are tested to hold 4 times the weight they're rated to. Safety Tested - UL Certified.
  • Pulling out to 16" and back in to 2.6" from the wall gives your TV smooth moves. Window glare bugging you? 15-degree tilt capability makes adjustments easy. No tools, no fuss, no hands. Just kidding, you'll need your hands.
  • Mounting has never been so easy: 30 minutes to install on 16" studs, with all hardware included and pre-divided. Our U.S.-based customer care team members will even pick up the phone on Sundays... seriously.
  • Feel the love with our 5-year warranty - included with all of our TV mounts.
  • Window glare bugging you? 15-degree tilt capability makes adjustments easy. No tools, no fuss, no hands. Just kidding, you'll need your hands.

Customer Reviews

Most helpful customer reviews

329 of 339 people found the following review helpful.
5Excellent TV mount and a trick
By jkw La Jolla
Outstanding design and construction! Easy to assemble. The hooks from which the TV hangs are large, making it very easy to mount TV once the main assembly is attached to the wall. I had the follow issue-where I want to center the TV was right over a stud. I mounted a 3x1 ft by 3/4"piece of maple to the the studs to either side of the center stud. I would have also put screws into the center stud if my TV was heavy but at only 37 lbs did not feel that necessary. I then screwed the TV mount to the board with 10 3/8 by 1" lag screws. Using this system, you could attached the mount anywhere left-to-right on the board, would not need to be centered

196 of 206 people found the following review helpful.
5OMG!!!!
By Brenden Coviello
OMG! If you are looking for a super high quality articulating mount this is it. Look no further. I love this mount and will only use Echogear mounts going forward. I'll even recommend to all my friends and family. It's a rock solid mount and the quality is superior. Check out my mount job.

40 of 43 people found the following review helpful.
4So far so good but requires more for Samsung KS8000
By tsukasu
The unit appears well built and sturdy and the articulation works great. Installation was fairly simple however I must be one of the unlucky people that encountered some issues. Obviously, you can't have a product that works for every situation but mine encountered issues in two main areas.

The first was mounting the unit to my wall. I live in South FL and my house is CBS construction (concrete block). Where I was mounting my TV required the use of two different types of bolts. It just so happened that one side required toggle bolts due to the open cells of the concrete block and the other side required sleeve anchors due to solid block. Again this is no fault of the manufacturer, however the bolts they supplied would not work with either of my options so I had to procure my own solution there. No big deal, this was anticipated, though it would have been nice to have additional sizes of bolts included with the product.

The second issue is where the star deduction comes from; mounting the harness to the VESA on the back of the TV. I just purchased a Samsung KS8000. The supplied spacers that come with the TV were made for Samsung's own mount but they did not include the screws which I believe are 42 and 44mm. Makes sense, they want you to buy their mount. However the supplied items from the mount did not fit either. Echogear supplied 2 sizes of M8 screws (M8 are the size for the KS8000) 20mm and 35mm. The 20mm were too short even without spacers or washers. The 35mm were too long to use only the screws and washers and required spacers. The spacers that came with the mount were too short and did nothing for the 35mm screws. The Samsung spacers were too long and the 35mm screws would not thread. So rather than trying to find 42 and 44mm M8 screws somewhere, I had to measure and cut the Samsung supplied spacers. This wasn't a monumental task but for someone looking to buy this mount and have it work right out of the box with a Samsung KS8000 TV will be in for a little work.

Again I understand it's impossible to have something for every situation but the Samsung KS8000 is a fairly popular TV from a leading brand so Echogear may want to at the very least add 44mm screws. Still, with a little improvisation this is a great mount and so far is holding up nicely.

See all stars, based on 4195 reviews...